OPA2111KM

2 Channels 10mA per Channel 3pA 82 dB Instrumentational OP Amps 0.0005μA 18V 10V~36V ±5V~18V OPA2111 8 Pins TO-99-8 Metal Can

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2111KM
Package: TO-99-8 Metal Can
Datasheet: PDF
Stock: 761
Description: 2 Channels 10mA per Channel 3pA 82 dB Instrumentational OP Amps 0.0005μA 18V 10V~36V ±5V~18V OPA2111 8 Pins TO-99-8 Metal Can(Kg)

Inquiry Now

Details

Tags

Parameters
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	BOTTOM
Terminal Form	WIRE
Number of Functions	2
Supply Voltage	15V
Base Part Number	OPA2111
Pin Count	8
Operating Supply Voltage	18V
Number of Channels	2
Operating Supply Current	5mA
Nominal Supply Current	9mA
Power Dissipation	500mW
Output Current	10mA
Slew Rate	2V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	82 dB
Current - Input Bias	3pA
Voltage - Supply, Single/Dual (±)	10V~36V ±5V~18V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	2mV
Bandwidth	2MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	2000 kHz
Voltage Gain	125dB
Average Bias Current-Max (IIB)	0.0005μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	300μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000015μA
Programmable Power	NO
Dual Supply Voltage	15V
Input Offset Current-Max (IIO)	0.000375μA
Height	5.72mm
Length	9.08mm
Width	9.08mm
Thickness	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Lifecycle Status	LIFEBUY (Last Updated: 2 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	TO-99-8 Metal Can
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Series	Difet®
Pbfree Code	yes
Part Status	Last Time Buy
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8

OPA2111KM Overview

In order to protect the op amps, a TO-99-8 Metal Can case is used. An op amp ic of the General Purpose type. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. For this electronic part, it is recommended that you mount it with type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 5mA . There should be no change in the voltage gain at 125dB. 2 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. This buffer amplifier is assigned within the Difet? series by its manufacturer.