OPA211AIDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA211 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 6mA |
| Output Current | 30mA |
| Slew Rate | 27V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 60nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 30μV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 45000 kHz |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 45MHz |
| Max I/O Voltage | 125μV |
| Wideband | YES |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA211AIDGKR Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 30μV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 3.6mA . It is a member of the 114dB's 114dB family. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 18V. The linear amplifier is packaged by using a TR axis.
OPA211AIDGKR Features
8 Pins
supply voltage of 15V
114dB voltage gain
Output Type: Rail-to-Rail
OPA211AIDGKR Applications
There are a lot of Texas Instruments OPA211AIDGKR Instrumentational OP Amps applications.
- Proportional counter tubes
- Test equipment
- Portable electronic products powered by batteries
- Band-pass filter
- Voltage regulation circuit
- Video data acquisition
- Test and measurement instruments
- Strain gauges
- Multiplication circuits
- Signal amplification
