OPA211AIDRGT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Base Part Number | OPA211 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 6mA |
| Output Current | 30mA |
| Slew Rate | 27V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 60nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 30μV |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 45000 kHz |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 45MHz |
| Max I/O Voltage | 125μV |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 730μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA211AIDRGT Overview
Op amp is packaged in 8-WFDFN Exposed Pad case. An op amp of this type is a General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 30μV voltage. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 3.6mA. Maintain 114dB as the voltage gain. Instrumentation amplifier has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 18V. A TR-shaped amplifier is used to pack the buffer amps.
OPA211AIDRGT Features
8 Pins
supply voltage of 15V
114dB voltage gain
Output Type: Rail-to-Rail
OPA211AIDRGT Applications
There are a lot of Texas Instruments OPA211AIDRGT Instrumentational OP Amps applications.
- Test equipment
- Scintillation detectors
- Tablets
- RF cable systems
- Industrial control system
- High-frequency data acquisition systems
- Division circuits
- Switching amplifier
- Hand-held batteries
- Navigation
