OPA2131UA

2 Channels 25mA per Channel 5pA 70 dB Instrumentational OP Amps 0.00005μA 9V~36V ±4.5V~18V OPA2131 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2131UA
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 399
Description: 2 Channels 25mA per Channel 5pA 70 dB Instrumentational OP Amps 0.00005μA 9V~36V ±4.5V~18V OPA2131 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Base Part Number	OPA2131
Pin Count	8
Number of Channels	2
Operating Supply Current	1.5mA
Nominal Supply Current	1.75mA
Output Current	25mA
Slew Rate	10V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	5pA
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~18V
Output Current per Channel	25mA
Input Offset Voltage (Vos)	200μV
Bandwidth	4MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	4000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.00005μA
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Dual Supply Voltage	15V
Nominal Gain Bandwidth Product	4MHz
Max I/O Voltage	1mV
Power	NO
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2131UA Overview

It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 200μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. A supply current of 1.5mA can be used to operate this linear amplifier. Keeping the voltage gain at 110dB is the best course of action. Buffer op amp is equipped with 2 channels on the device.