OPA2132UAG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA2132 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 4mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 8MHz |
| Max I/O Voltage | 2mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2132UAG4 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. Op amp ic rates 2mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using an 4mA supply current, this operational amplifier ics can be operated. 120dB should remain the voltage gain. A voltage rating of 2 is indicated for the op amp's operating supply voltage.
OPA2132UAG4 Features
8 Pins
supply voltage of 15V
120dB voltage gain
OPA2132UAG4 Applications
There are a lot of Texas Instruments OPA2132UAG4 Instrumentational OP Amps applications.
- Video computer boards
- Digital cameras
- MP3
- Communication
- Fast A/D and D/A converters
- Thermocouples
- Radiation thermometry transducers
- Switching amplifier
- Image computer boards
- Measurements of Wheatstone bridge
