OPA2134PAG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA2134 |
| Pin Count | 8 |
| Operating Supply Voltage | 36V |
| Number of Elements | 2 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 10mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 35mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 8MHz |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2134PAG4 Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. Op amps are Audio types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. Please take in mind that op amp should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 2mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~85°C. An 4mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 120dB. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 36V. The SoundPlus? indicates the series number of the op amp.
OPA2134PAG4 Features
8 Pins
supply voltage of 15V
120dB voltage gain
OPA2134PAG4 Applications
There are a lot of Texas Instruments OPA2134PAG4 Instrumentational OP Amps applications.
- Tablets
- Portable media players
- Thermocouples
- Signal operation
- Portable docking station
- Multiplication circuits
- Information processing
- Integrator circuits
- Displayers for aircraft and air transportation control systems
- Weak signal detection
