OPA2141AID

2 Channels 36mA per Channel 2pA 120 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA2141 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2141AID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 467
Description: 2 Channels 36mA per Channel 2pA 120 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA2141 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	18V
Base Part Number	OPA2141
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Number of Channels	2
Operating Supply Current	1.8mA
Nominal Supply Current	2.3mA
Output Current	36mA
Slew Rate	20V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	120 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±2.25V~18V
Output Current per Channel	36mA
Input Offset Voltage (Vos)	1mV
Bandwidth	10MHz
Neg Supply Voltage-Nom (Vsup)	-18V
Unity Gain BW-Nom	10000 kHz
Voltage Gain	126dB
Power Supply Rejection Ratio (PSRR)	137.07dB
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	NO
Max Frequency	1MHz
Programmable Power	NO
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	3.5mV
Input Offset Current-Max (IIO)	0.001μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active

OPA2141AID Overview

It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called J-FET-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 18V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 1mV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. This op amp can operate from a supply current at 1.8mA. Keeping the voltage gain at 126dB is the best course of action. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of instrumentation amplifier is rated 18V voltage.