OPA2141AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Base Part Number | OPA2141 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 2.3mA |
| Output Current | 36mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 36mA |
| Input Offset Voltage (Vos) | 1mV |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126dB |
| Power Supply Rejection Ratio (PSRR) | 137.07dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 3.5mV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2141AIDR Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 18V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.8mA and 10 . The voltage gain should stay at 126dB. There are 2 circuits on op amps. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 18V voltage. As a result of this, the buffer amplifier is packed in TR.
OPA2141AIDR Features
8 Pins
supply voltage of 18V
126dB voltage gain
Output Type: Rail-to-Rail
OPA2141AIDR Applications
There are a lot of Texas Instruments OPA2141AIDR Instrumentational OP Amps applications.
- Strain gauges
- Proportional operation circuits
- pH (acidity)
- ECG equipment
- Large motor controllers
- Power control
- Industrial applications including automation
- Communication device
- High speed sample
- Switching amplifier
