OPA2180IDGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2180 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Operating Supply Current | 450μA |
| Nominal Supply Current | 450μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 250pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 15μV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 2MHz |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2MHz |
| Max I/O Voltage | 75μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2180IDGK Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Zero-Drift-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 15μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~105°C. A supply current of 450μA can be used to operate this linear amplifier. Keeping the voltage gain at 120dB is the best course of action. There are 2 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 18V.
OPA2180IDGK Features
8 Pins
120dB voltage gain
Output Type: Rail-to-Rail
OPA2180IDGK Applications
There are a lot of Texas Instruments OPA2180IDGK Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Communication device
- High speed sample
- Radiation thermometry transducers
- Television broadcasting equipment
- High-frequency data acquisition systems
- Signal operation
- RF cable systems
- Professional videography
- Subtraction operation circuits
