OPA2180IDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2180 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 450μA |
| Supply Current-Max | 1.05mA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 250pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 15μV |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2MHz |
| Max I/O Voltage | 75μV |
| Wideband | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2180IDGKR Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. Zero-Drift-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 15μV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 450μA . 120dB should be the voltage gain. This op amp contains 2 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A total of 2 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The linear amplifier is packaged by using a TR axis.
OPA2180IDGKR Features
8 Pins
120dB voltage gain
Output Type: Rail-to-Rail
OPA2180IDGKR Applications
There are a lot of Texas Instruments OPA2180IDGKR Instrumentational OP Amps applications.
- Portable media players
- Oscilloscopes
- Displayers for aircraft and air transportation control systems
- Band-pass filter
- Biopotential
- Measurements of Wheatstone bridge
- Automatic control
- Weak signal detection
- Fast A/D and D/A converters
- Semiconductor detectors
