OPA2209AIDR

2 Channels 65mA per Channel 1nA 120 dB Instrumentational OP Amps 0.015μA 18V 4.5V~36V ±2.25V~18V OPA2209 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2209AIDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 681
Description: 2 Channels 65mA per Channel 1nA 120 dB Instrumentational OP Amps 0.015μA 18V 4.5V~36V ±2.25V~18V OPA2209 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Base Part Number	OPA2209
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Number of Channels	2
Operating Supply Current	2.2mA
Nominal Supply Current	2.5mA
Output Current	65mA
Slew Rate	6.4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	120 dB
Current - Input Bias	1nA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±2.25V~18V
Output Current per Channel	65mA
Input Offset Voltage (Vos)	150μV
Bandwidth	18MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	18000 kHz
Voltage Gain	132dB
Average Bias Current-Max (IIB)	0.015μA
Power Supply Rejection Ratio (PSRR)	146.02dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	35μV
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.0045μA
Programmable Power	NO
Nominal Gain Bandwidth Product	18MHz
Max I/O Voltage	150μV
Input Offset Current-Max (IIO)	0.015μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2209AIDR Overview

In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 8 pins on this chip. There is an input offset voltage of 150μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 2.2mA . It is a member of the 132dB's 132dB family. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 18V. For packing the buffer amplifier, the TR-axis is adopted.