OPA2227PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA2227 |
| Pin Count | 8 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.7mA |
| Nominal Supply Current | 3.8mA |
| Output Current | 45mA |
| Slew Rate | 2.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2.5nA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 160dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 126.02dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 10μV |
| Settling Time | 5 μs |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 8MHz |
| Max I/O Voltage | 200μV |
| Input Offset Current-Max (IIO) | 0.01μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2227PA Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Op amp ic rates 200μV for input offset voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using an 3.7mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 160dB at all times. There are 2 channels on the operational amplifiers.
OPA2227PA Features
8 Pins
supply voltage of 15V
160dB voltage gain
OPA2227PA Applications
There are a lot of Texas Instruments OPA2227PA Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Video computer boards
- Multimedia playback equipment
- Voltage regulation circuit
- Signal transformation
- Automotive sensors
- Addition operation circuits
- Oscilloscopes
- Industrial applications including automation
- Radiation thermometry transducers
