OPA2234UG4

2 Channels 22mA per Channel 12nA 91 dB Instrumentational OP Amps 18V 2.7V~36V ±1.35V~18V OPA2234 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2234UG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 308
Description: 2 Channels 22mA per Channel 12nA 91 dB Instrumentational OP Amps 18V 2.7V~36V ±1.35V~18V OPA2234 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Lifecycle Status	LIFEBUY (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Last Time Buy
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Base Part Number	OPA2234
Pin Count	8
Operating Supply Voltage	18V
Number of Channels	2
Operating Supply Current	275μA
Nominal Supply Current	700μA
Slew Rate	0.2V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	91 dB
Current - Input Bias	12nA
Voltage - Supply, Single/Dual (±)	2.7V~36V ±1.35V~18V
Output Current per Channel	22mA
Input Offset Voltage (Vos)	100μV
Bandwidth	350 kHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	350 kHz
Voltage Gain	120dB
Power Supply Rejection Ratio (PSRR)	110.46dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	70μV
Low-Bias	NO
Micropower	YES
Programmable Power	NO
Dual Supply Voltage	9V
Nominal Gain Bandwidth Product	350 kHz
Max I/O Voltage	100μV
Input Offset Current-Max (IIO)	0.005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2234UG4 Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 275μA, this op amp ic can operate. 120dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage.