OPA2251PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA2251 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Operating Supply Current | 27μA |
| Nominal Supply Current | 76μA |
| Slew Rate | 0.01V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 35 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 35 kHz |
| Voltage Gain | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 50μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 35 kHz |
| Max I/O Voltage | 100μV |
| Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2251PA Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. Op amp ic rates 100μV for input offset voltage. This electronic part is best mounted with type Through Hole. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Operational amplifier can operate supply current at 27μA. Op amp is a member of the 120dB's 120dB family. Instrumentation amplifier has 2 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 18V.
OPA2251PA Features
8 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2251PA Applications
There are a lot of Texas Instruments OPA2251PA Instrumentational OP Amps applications.
- Radar
- Portable docking station
- Voltage regulation circuit
- High gain DC amplifier
- Video computer boards
- E-book readers
- Blood pressure sensors
- Exponential operation circuits
- Measurements of Wheatstone bridge
- Industrial applications including automation
