OPA2251PAG4
| Parameters | |
|---|---|
| Number of Elements | 2 |
| Operating Supply Current | 27μA |
| Nominal Supply Current | 76μA |
| Slew Rate | 0.01V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 35 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 35 kHz |
| Voltage Gain | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 50μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 35 kHz |
| Max I/O Voltage | 100μV |
| Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA2251 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
OPA2251PAG4 Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. Op amp rates 100μV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 27μA and 10 . Voltage gain should remain at 120dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of the buffer op amp is rated at 18V.
OPA2251PAG4 Features
8 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2251PAG4 Applications
There are a lot of Texas Instruments OPA2251PAG4 Instrumentational OP Amps applications.
- Division circuits
- Signal filtering
- Video amplifiers
- Tablets
- Communication device
- Thermocouples
- Oscilloscopes
- Scintillation detectors
- Home audio systems
- High gain DC amplifier
