OPA2277P
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 10μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 25μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.001μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA2277 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 790μA |
| Nominal Supply Current | 1.65mA |
| Max Supply Current | 825μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 500pA |
OPA2277P Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. Op amp ic rates 25μV for input offset voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 790μA , this buffer op amp will be able to operate. Keeping the voltage gain at 140dB is the best course of action. Instrumentation amplifier has 2 channels on it.
OPA2277P Features
8 Pins
supply voltage of 15V
140dB voltage gain
OPA2277P Applications
There are a lot of Texas Instruments OPA2277P Instrumentational OP Amps applications.
- Scintillation detectors
- Industrial applications including automation
- Blood pressure sensors
- Band-pass filter
- Instrumentation
- Navigation
- Portable docking station
- Division circuits
- Professional videography
- Information processing
