banner_page

OPA2301AIDG4

70mA per Channel 0.1pA 66 dB Instrumentational OP Amps 0.000005μA 2.7V~5.5V ±1.35V~2.75V OPA2301 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA2301AIDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 522
  • Description: 70mA per Channel 0.1pA 66 dB Instrumentational OP Amps 0.000005μA 2.7V~5.5V ±1.35V~2.75V OPA2301 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number OPA2301
Pin Count 8
Number of Elements 2
Operating Supply Current 9.5mA
Nominal Supply Current 24mA
Slew Rate 80V/μs
Amplifier Type Voltage Feedback
Common Mode Rejection Ratio 66 dB
Current - Input Bias 0.1pA
Voltage - Supply, Single/Dual (±) 2.7V~5.5V ±1.35V~2.75V
Output Current per Channel 70mA
Input Offset Voltage (Vos) 5mV
Bandwidth 150MHz
Unity Gain BW-Nom 150000 kHz
Voltage Gain 106dB
Average Bias Current-Max (IIB) 0.000005μA
Power Supply Rejection Ratio (PSRR) 86.02dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Voltage - Input Offset 1mV
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.000005μA
Programmable Power NO
Nominal Gain Bandwidth Product 150MHz
Max I/O Voltage 5mV
Input Offset Current-Max (IIO) 0.000005μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

OPA2301AIDG4 Overview


In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a Voltage Feedback type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. Op amp rates 5mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 9.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain. There are 2 elements in this buffer amplifier.

OPA2301AIDG4 Features


8 Pins
supply voltage of 5V
106dB voltage gain

OPA2301AIDG4 Applications


There are a lot of Texas Instruments OPA2301AIDG4 Instrumentational OP Amps applications.

  • Television broadcasting equipment
  • Active probe
  • Band-pass filter
  • Image computer boards
  • Automatic control
  • Radar
  • Video conversion and routing
  • Power control
  • Signal filtering
  • Professional videography

Write a review

Note: HTML is not translated!
    Bad           Good