OPA2313IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | OPA2313 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5.5V |
| Number of Circuits | 2 |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Output Current | 15mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 500μV |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 2.5mV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2313IDR Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 1.8V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 50μA . There should be no change in the voltage gain. A linear amplifier like this has 2 circuits on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5V. For packing the buffer amplifier, the TR-axis is adopted.
OPA2313IDR Features
8 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
OPA2313IDR Applications
There are a lot of Texas Instruments OPA2313IDR Instrumentational OP Amps applications.
- Signal filtering
- Fast A/D and D/A converters
- Voltage regulation circuit
- Addition operation circuits
- Medical imaging
- Cinema or auditorium audio system
- Large motor controllers
- Precision measurement
- Wireless base stations
- Multiplication circuits
