OPA2317IDGKT

2 Channels 5mA per Channel 275pA 95 dB Instrumentational OP Amps 0.0003μA 1.8V~5.5V OPA2317 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2317IDGKT
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 620
Description: 2 Channels 5mA per Channel 275pA 95 dB Instrumentational OP Amps 0.0003μA 1.8V~5.5V OPA2317 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~150°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	OPA2317
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	21μA
Nominal Supply Current	21μA
Slew Rate	0.15V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	95 dB
Current - Input Bias	275pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V
Output Current per Channel	5mA
Input Offset Voltage (Vos)	20μV
Bandwidth	300 kHz
Unity Gain BW-Nom	300 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.0003μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Low-Bias	NO
Micropower	YES
Programmable Power	NO
Power	NO
Input Voltage Noise Density	55nV/sqrt Hz
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2317IDGKT Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. There is an input offset voltage of 20μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~150°C . This op amp can operate from a supply current at 21μA. Keeping the voltage gain at 110dB is the best course of action. 2 channels are available on the instrumentation amplifier. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. This linear amplifier pack is based on the TR axis.