OPA2320AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | OPA2320 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 1.45mA |
| Nominal Supply Current | 1.45mA |
| Output Current | 65mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 20MHz |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 132dB |
| Average Bias Current-Max (IIB) | 9e-7μA |
| Power Supply Rejection Ratio (PSRR) | 106.02dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 40μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 9e-7μA |
| Programmable Power | NO |
| Max I/O Voltage | 150μV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 9e-7μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2320AIDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 1.45mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 132dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The op amp is rated for an operating supply voltage of 2. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA2320AIDR Features
8 Pins
supply voltage of 5V
132dB voltage gain
Output Type: Rail-to-Rail
OPA2320AIDR Applications
There are a lot of Texas Instruments OPA2320AIDR Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Broadcasting
- Automatic control
- Blood pressure sensors
- Ultrasound transducers
- Portable electronic products powered by batteries
- Tablets
- Weak signal detection
- Logarithmic operation circuits
- Hand-held batteries
