OPA2322AIDR

65mA per Channel 0.2pA 90 dB Instrumentational OP Amps 0.0004μA 1.8V~5.5V ±0.9V~2.75V OPA2322 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2322AIDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 217
Description: 65mA per Channel 0.2pA 90 dB Instrumentational OP Amps 0.0004μA 1.8V~5.5V ±0.9V~2.75V OPA2322 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	OPA2322
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	2
Operating Supply Current	1.5mA
Nominal Supply Current	1.75mA
Output Current	65mA
Slew Rate	10V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	65mA
Input Offset Voltage (Vos)	2mV
Unity Gain BW-Nom	20000 kHz
Voltage Gain	130dB
Average Bias Current-Max (IIB)	0.0004μA
Power Supply Rejection Ratio (PSRR)	100dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Nominal Gain Bandwidth Product	20MHz
Max I/O Voltage	2mV
Wideband	NO
Input Offset Current-Max (IIO)	0.00001μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)

OPA2322AIDR Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Cut Tape (CT) case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. This op amp can operate from a supply current at 1.5mA. 130dB should be the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There is a rating of 2 for the operating supply voltage of the buffer op amp. An buffer amplifier is packed in a TR-shape according to the design.