OPA2330AIDGKR

5mA per Channel 200pA 100 dB Instrumentational OP Amps 0.0005μA 1.8V~5.5V ±0.9V~2.75V OPA2330 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2330AIDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 965
Description: 5mA per Channel 200pA 100 dB Instrumentational OP Amps 0.0005μA 1.8V~5.5V ±0.9V~2.75V OPA2330 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	OPA2330
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	2
Operating Supply Current	21μA
Nominal Supply Current	35μA
Output Current	5mA
Slew Rate	0.16V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	100 dB
Current - Input Bias	200pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	5mA
Input Offset Voltage (Vos)	50μV
Bandwidth	350 kHz
Unity Gain BW-Nom	350 kHz
Voltage Gain	115dB
Average Bias Current-Max (IIB)	0.0005μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	8μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.0005μA
Programmable Power	NO
Max I/O Voltage	50μV
Power	NO
Input Offset Current-Max (IIO)	0.001μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2330AIDGKR Overview

The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. Op amps are Zero-Drift types of amplifier on the chip. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 50μV. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing a supply current of 21μA , this buffer op amp will be able to operate. There should be no change in the voltage gain. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Op amp has total of 2 elements. As a result of this, the buffer amplifier is packed in TR.