OPA2330AIDGKT

2 Channels 5mA per Channel 200pA 100 dB Instrumentational OP Amps 0.0005μA 1.8V~5.5V ±0.9V~2.75V OPA2330 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2330AIDGKT
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 732
Description: 2 Channels 5mA per Channel 200pA 100 dB Instrumentational OP Amps 0.0005μA 1.8V~5.5V ±0.9V~2.75V OPA2330 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	OPA2330
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	21μA
Nominal Supply Current	35μA
Output Current	5mA
Slew Rate	0.16V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	100 dB
Current - Input Bias	200pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	5mA
Input Offset Voltage (Vos)	50μV
Bandwidth	350 kHz
Unity Gain BW-Nom	350 kHz
Voltage Gain	115dB
Average Bias Current-Max (IIB)	0.0005μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	8μV
Low-Bias	YES
Micropower	YES
Max Frequency	10Hz
Bias Current-Max (IIB) @25C	0.0005μA
Programmable Power	NO
Max I/O Voltage	50μV
Power	NO
Input Offset Current-Max (IIO)	0.001μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2330AIDGKT Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp of this type is a Zero-Drift-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 8 pins on this chip. Op amp rates 50μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 21μA and 10 . Keeping the voltage gain at 115dB is the best course of action. There are 2 channels on the operational amplifiers. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For the packing of the instrumentation amplifier, TR is adopted.