OPA2330AIDRBR

5mA per Channel 200pA 100 dB Instrumentational OP Amps 0.0005μA 1.8V~5.5V ±0.9V~2.75V OPA2330 8 Pins 8-VDFN Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2330AIDRBR
Package: 8-VDFN Exposed Pad
Datasheet: -
Stock: 673
Description: 5mA per Channel 200pA 100 dB Instrumentational OP Amps 0.0005μA 1.8V~5.5V ±0.9V~2.75V OPA2330 8 Pins 8-VDFN Exposed Pad(Kg)

Details

Tags

Parameters
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	OPA2330
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	2
Operating Supply Current	21μA
Nominal Supply Current	35μA
Output Current	5mA
Slew Rate	0.16V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	100 dB
Current - Input Bias	200pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	5mA
Input Offset Voltage (Vos)	50μV
Gain Bandwidth Product	350kHz
Unity Gain BW-Nom	350 kHz
Voltage Gain	115dB
Average Bias Current-Max (IIB)	0.0005μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	8μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.0005μA
Programmable Power	NO
Max I/O Voltage	50μV
Wideband	NO
Power	NO
Input Offset Current-Max (IIO)	0.001μA
Height	1mm
Length	3mm
Width	3mm
Thickness	880μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-VDFN Exposed Pad
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4

OPA2330AIDRBR Overview

The linear amplifier is packaged in a 8-VDFN Exposed Pad case. The instrumentation amplifier in this picture is of the Zero-Drift-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. There are a total of 8 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 50μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. An 21μA volt supply current is needed for this linear amplifier to operate. Maintain 115dB as the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. To pack the operational amplifier ics, TR is adopted as the packing method.