OPA2333AID

2 Channels 5mA per Channel 70pA 106 dB Instrumentational OP Amps 2.75V 1.8V~5.5V ±0.9V~2.75V OPA2333 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2333AID
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 532
Description: 2 Channels 5mA per Channel 70pA 106 dB Instrumentational OP Amps 2.75V 1.8V~5.5V ±0.9V~2.75V OPA2333 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	OPA2333
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	2.75V
Number of Channels	2
Operating Supply Current	17μA
Nominal Supply Current	50μA
Output Current	5mA
Slew Rate	0.16V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	106 dB
Current - Input Bias	70pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	5mA
Input Offset Voltage (Vos)	10μV
Bandwidth	350 kHz
Unity Gain BW-Nom	350 kHz
Voltage Gain	130dB
Power Supply Rejection Ratio (PSRR)	120dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	2μV
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Max I/O Voltage	10μV
Input Offset Current-Max (IIO)	0.0004μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 23 hours ago)
Contact Plating	Gold

OPA2333AID Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Zero-Drift-type. There is a Tube case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 10μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 17μA and 10 . 130dB should be the voltage gain. Op amp ic has 2 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 2.75V.