Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
MicroAmplifier™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
OPA2336 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Power Supplies |
5V |
Number of Circuits |
2 |
Operating Supply Current |
20μA |
Nominal Supply Current |
64μA |
Slew Rate |
0.03V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.3V~5.5V |
Output Current per Channel |
5mA |
Input Offset Voltage (Vos) |
60μV |
Bandwidth |
100 kHz |
Unity Gain BW-Nom |
100 kHz |
Voltage Gain |
115dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7.5V |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Max I/O Voltage |
125μV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00001μA |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA2336E/2K5G4 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. Op amp ic rates 60μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 20μA, this op amp ic can operate. There should be no change in the voltage gain at 115dB. There are 2 circuits on op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TR. Buffer op amp series numbers are indicated by the MicroAmplifier?.
OPA2336E/2K5G4 Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
OPA2336E/2K5G4 Applications
There are a lot of Texas Instruments OPA2336E/2K5G4 Instrumentational OP Amps applications.
- Gaming industry
- Multiplication circuits
- Inverse/same-phase proportional circuit
- High gain DC amplifier
- Biopotential
- Power generator
- Computer workstations
- Measurements of Wheatstone bridge
- Subtraction operation circuits
- Professional videography