OPA2336EA/250G4
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2336 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Nominal Supply Current | 64μA |
| Current - Supply | 20μA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.5V |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Power Supply Rejection Ratio (PSRR) | 92.04dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 60μV |
| Current - Output / Channel | 5mA |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
OPA2336EA/250G4 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 8. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 500μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Op amp is a member of the 115dB's 115dB family. Buffer op amp is equipped with 2 channels on the device. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For packing the buffer amplifier, the TR-axis is adopted. To run supply current of buffer amplifier under 20μA. Buffer op amp series numbers are indicated by the MicroAmplifier?.
OPA2336EA/250G4 Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
OPA2336EA/250G4 Applications
There are a lot of Texas Instruments OPA2336EA/250G4 Instrumentational OP Amps applications.
- High gain DC amplifier
- Weighing systems
- Video amplifiers
- Industrial control system
- Ultrasound transducers
- Exponential operation circuits
- Video computer boards
- single/dual op amp sum and difference circuits
- High speed sample
- Industrial applications including automation
