OPA2336P
| Parameters | |
|---|---|
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Power Supply Rejection Ratio (PSRR) | 92.04dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 60μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 125μV |
| Number of Amplifiers | 1 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | OPA2336 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 64μA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.5V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
OPA2336P Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. There is an input offset voltage of 125μV for this buffer op amp. Through Hole is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 20μA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 115dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. As a whole, there are 2 elements that make up this buffer amplifier. MicroAmplifier? corresponds to linear amplifier's series. On the linear amplifier, there are 1 amplifiers that are used.
OPA2336P Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
OPA2336P Applications
There are a lot of Texas Instruments OPA2336P Instrumentational OP Amps applications.
- Portable docking station
- Communication device
- Oscilloscopes
- Subtraction operation circuits
- High gain DC amplifier
- Weighing systems
- Video amplifiers
- Displayers for aircraft and air transportation control systems
- Multiplication circuits
- Wireless base stations
