banner_page

OPA2336UA

2 Channels 5mA per Channel 1pA 76 dB Instrumentational OP Amps 0.00006μA 2.3V~5.5V OPA2336 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA2336UA
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 384
  • Description: 2 Channels 5mA per Channel 1pA 76 dB Instrumentational OP Amps 0.00006μA 2.3V~5.5V OPA2336 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Series MicroAmplifier™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number OPA2336
Pin Count 8
Output Type Rail-to-Rail
Power Supplies 5V
Number of Channels 2
Operating Supply Current 20μA
Nominal Supply Current 64μA
Slew Rate 0.03V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 76 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 2.3V~5.5V
Output Current per Channel 5mA
Input Offset Voltage (Vos) 500μV
Bandwidth 100 kHz
Unity Gain BW-Nom 100 kHz
Voltage Gain 115dB
Average Bias Current-Max (IIB) 0.00006μA
Power Supply Rejection Ratio (PSRR) 92.04dB
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 7.5V
Voltage - Input Offset 60μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.00001μA
Programmable Power NO
Max I/O Voltage 500μV
Input Offset Current-Max (IIO) 0.00001μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

OPA2336UA Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. The input offset voltage is 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 20μA . The voltage gain should stay at 115dB. Op amp ic has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. MicroAmplifier? corresponds to the op amp's series.

OPA2336UA Features


8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail

OPA2336UA Applications


There are a lot of Texas Instruments OPA2336UA Instrumentational OP Amps applications.

  • Digital cameras
  • Cinema or auditorium audio system
  • Video amplifiers
  • Ultrasound transducers
  • Fission chambers
  • RF cable systems
  • Communication
  • Television broadcasting equipment
  • Active probe
  • Fast A/D and D/A converters

Write a review

Note: HTML is not translated!
    Bad           Good