Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
MicroAmplifier™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
OPA2336 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Power Supplies |
5V |
Number of Circuits |
2 |
Operating Supply Current |
20μA |
Nominal Supply Current |
64μA |
Slew Rate |
0.03V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
76 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.3V~5.5V |
Output Current per Channel |
5mA |
Input Offset Voltage (Vos) |
60μV |
Bandwidth |
100 kHz |
Unity Gain BW-Nom |
100 kHz |
Voltage Gain |
115dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7.5V |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Max I/O Voltage |
500μV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00001μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA2336UA/2K5G4 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 60μV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . You can run this op amp ic on 20μA . There should be no change in the voltage gain. This op amp ic has 2 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. TR is adopted to pack the instrumentation amplifier. MicroAmplifier? corresponds to the op amp's series.
OPA2336UA/2K5G4 Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
OPA2336UA/2K5G4 Applications
There are a lot of Texas Instruments OPA2336UA/2K5G4 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- High-frequency data acquisition systems
- Medical imaging
- Image computer boards
- Signal operation
- Inverse/same-phase proportional circuit
- Professional videography
- Displayers for aircraft and air transportation control systems
- Band-stop filter
- Radar