OPA2337PA

2 Channels 9mA per Channel 0.2pA 74 dB Instrumentational OP Amps 0.00001μA 2.7V~5.5V ±1.35V~2.75V OPA2337 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2337PA
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 447
Description: 2 Channels 9mA per Channel 0.2pA 74 dB Instrumentational OP Amps 0.00001μA 2.7V~5.5V ±1.35V~2.75V OPA2337 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	MicroAmplifier™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	OPA2337
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Channels	2
Operating Supply Current	525μA
Nominal Supply Current	2mA
Slew Rate	1.2V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	74 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	9mA
Input Offset Voltage (Vos)	3mV
Bandwidth	3MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00001μA
Power Supply Rejection Ratio (PSRR)	92.04dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7.5V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Nominal Gain Bandwidth Product	3MHz
Max I/O Voltage	3mV
Input Offset Current-Max (IIO)	0.00001μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2337PA Overview

In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 3mV for this buffer op amp. This electrical part should be mounted using type Through Hole. With regard to operating temperature, op amp ranges -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 525μA . There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The MicroAmplifier? represents the op amp's series number.