OPA2340UA/2K5G4
| Parameters | |
|---|---|
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | OPA2340 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 1.9mA |
| Current - Supply | 750μA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 124dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Power Supply Rejection Ratio (PSRR) | 90.46dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 150μV |
| Current - Output / Channel | 50mA |
| Low-Bias | YES |
OPA2340UA/2K5G4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Keeping the voltage gain at 124dB is the best course of action. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total. The instrumentation amplifier is packed in the form of TR. It is recommended that this electronic component be used with an 750μA supply. MicroAmplifier? corresponds to the op amp's series.
OPA2340UA/2K5G4 Features
8 Pins
supply voltage of 5V
124dB voltage gain
Output Type: Rail-to-Rail
OPA2340UA/2K5G4 Applications
There are a lot of Texas Instruments OPA2340UA/2K5G4 Instrumentational OP Amps applications.
- High gain DC amplifier
- Voltage regulation circuit
- Information processing
- Image computer boards
- Signal transformation
- Communication
- Division circuits
- Weighing systems
- High input resistance broadband
- Medical imaging
