Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
MicroAmplifier™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
OPA2342 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Number of Elements |
2 |
Power Supplies |
3/5V |
Nominal Supply Current |
500μA |
Current - Supply |
150μA |
Slew Rate |
1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
74 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±1.35V~2.75V |
Input Offset Voltage (Vos) |
6mV |
Bandwidth |
1MHz |
Unity Gain BW-Nom |
1000 kHz |
Voltage Gain |
124dB |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
90.46dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7.5V |
Voltage - Input Offset |
1mV |
Current - Output / Channel |
15mA |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1MHz |
Max I/O Voltage |
6mV |
Input Offset Current-Max (IIO) |
0.00001μA |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA2342EA/2K5 Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 5.5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 6mV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The voltage gain should stay at 124dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There is a rating of 2 for the operating supply voltage of the buffer op amp. This linear amplifier pack is based on the TR axis. As a recommendation, this electronic component should be used with a power supply that can deliver 150μA. Instrumentation amplifiers are numbered by their MicroAmplifier? series.
OPA2342EA/2K5 Features
8 Pins
supply voltage of 5.5V
124dB voltage gain
Output Type: Rail-to-Rail
OPA2342EA/2K5 Applications
There are a lot of Texas Instruments OPA2342EA/2K5 Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Subtraction operation circuits
- Information processing
- Multiplication circuits
- Communication device
- Measurements of Wheatstone bridge
- Signal operation
- Semiconductor detectors
- High gain DC amplifier
- Thermocouples