OPA2343UA/2K5
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Current - Supply | 850μA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 92 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 2mV |
| Current - Output / Channel | 50mA |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Voltage Gain-Min | 40000 |
| Common-mode Reject Ratio-Min | 74 dB |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | OPA2343 |
| Pin Count | 8 |
OPA2343UA/2K5 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. During the manufacturing process, this buffer amplifier is divided into 2 circuits. On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier pack is based on the TR axis. As a recommendation, this electronic component should be used with a power supply that can deliver 850μA. The MicroAmplifier? stands for the buffer op amp's serial number. This op amp ic is capable of conducting at least 40000 voltage gains.
OPA2343UA/2K5 Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
OPA2343UA/2K5 Applications
There are a lot of Texas Instruments OPA2343UA/2K5 Instrumentational OP Amps applications.
- Power transmission
- Portable electronic products powered by batteries
- Video data acquisition
- Polarized electrodes
- Semiconductor detectors
- Active probe
- Biopotential
- Image computer boards
- Thermocouples
- Non-polarized electrodes
