banner_page

OPA2347YZDR

17mA per Channel 0.5pA 70 dB Instrumentational OP Amps 0.00001μA 2.3V~5.5V ±1.15V~2.75V OPA2347 8 Pins 8-VFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA2347YZDR
  • Package: 8-VFBGA, DSBGA
  • Datasheet: -
  • Stock: 199
  • Description: 17mA per Channel 0.5pA 70 dB Instrumentational OP Amps 0.00001μA 2.3V~5.5V ±1.15V~2.75V OPA2347 8 Pins 8-VFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-VFBGA, DSBGA
Surface Mount YES
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e1
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.5mm
Base Part Number OPA2347
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 2
Power Supplies 3/5V
Operating Supply Current 20μA
Nominal Supply Current 20μA
Output Current 17mA
Slew Rate 0.17V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 0.5pA
Voltage - Supply, Single/Dual (±) 2.3V~5.5V ±1.15V~2.75V
Output Current per Channel 17mA
Input Offset Voltage (Vos) 6mV
Bandwidth 350 kHz
Unity Gain BW-Nom 350 kHz
Voltage Gain 115dB
Average Bias Current-Max (IIB) 0.00001μA
Power Supply Rejection Ratio (PSRR) 84.44dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 7.5V
Voltage - Input Offset 2mV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.00001μA
Programmable Power NO
Nominal Gain Bandwidth Product 350 kHz
Max I/O Voltage 6mV
Input Offset Current-Max (IIO) 0.00001μA
Height 1mm
Length 1.3mm
Width 2.3mm
Thickness 650μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

OPA2347YZDR Overview


Op amp is packaged in 8-VFBGA, DSBGA case. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. Op amp rates 6mV as input offset voltage. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 20μA . There should be no change in the voltage gain. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. A voltage rating of 2 is indicated for the op amp's operating supply voltage. An buffer amplifier is packed in a TR-shape according to the design.

OPA2347YZDR Features


8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail

OPA2347YZDR Applications


There are a lot of Texas Instruments OPA2347YZDR Instrumentational OP Amps applications.

  • Car stereo
  • Subtraction operation circuits
  • Automation control systems
  • Digital cameras
  • Micro signal measurement
  • Oscilloscopes
  • Professional videography
  • Power generator
  • Signal filtering
  • Biopotential

Write a review

Note: HTML is not translated!
    Bad           Good