OPA2354AIDDAR
| Parameters | |
|---|---|
| Slew Rate | 150V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 100MHz |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 73.98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Settling Time | 30 ns |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 250MHz |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Max I/O Voltage | 8mV |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | OPA2354 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Operating Supply Current | 4.9mA |
| Supply Current-Max | 6mA |
OPA2354AIDDAR Overview
The linear amplifier is packaged in a 8-PowerSOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a Voltage Feedback type op amp. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 8mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 4.9mA and 10 . Voltage gain should remain at 110dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A total of 2 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result of this, the buffer amplifier is packed in TR.
OPA2354AIDDAR Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
OPA2354AIDDAR Applications
There are a lot of Texas Instruments OPA2354AIDDAR Instrumentational OP Amps applications.
- Ultrasound transducers
- Mobile phone
- Measurements of Wheatstone bridge
- Portable electronic products powered by batteries
- ECG equipment
- Radar
- pH (acidity)
- Test and measurement instruments
- Video conversion and routing
- Comparator
