banner_page

OPA2357AIDGST

2 Channels 100mA per Channel 3pA 56 dB Instrumentational OP Amps 0.00005μA 5V 2.5V~5.5V ±1.25V~2.75V OPA2357 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA2357AIDGST
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: -
  • Stock: 875
  • Description: 2 Channels 100mA per Channel 3pA 56 dB Instrumentational OP Amps 0.00005μA 5V 2.5V~5.5V ±1.25V~2.75V OPA2357 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 10
Operating Temperature -40°C~125°C
Packaging Cut Tape (CT)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 10
ECCN Code EAR99
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Terminal Pitch 0.5mm
Base Part Number OPA2357
Pin Count 10
Output Type Rail-to-Rail
Operating Supply Voltage 5V
Number of Channels 2
Operating Supply Current 4.9mA
Supply Current-Max 6mA
Slew Rate 150V/μs
Amplifier Type Voltage Feedback
Common Mode Rejection Ratio 56 dB
Current - Input Bias 3pA
Voltage - Supply, Single/Dual (±) 2.5V~5.5V ±1.25V~2.75V
Output Current per Channel 100mA
Input Offset Voltage (Vos) 8mV
Bandwidth 100MHz
Unity Gain BW-Nom 100000 kHz
Voltage Gain 110dB
Average Bias Current-Max (IIB) 0.00005μA
Power Supply Rejection Ratio (PSRR) 73.98dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 2mV
Settling Time 30 ns
Low-Bias YES
Micropower NO
-3db Bandwidth 250MHz
Bias Current-Max (IIB) @25C 0.00005μA
Programmable Power NO
Max I/O Voltage 8mV
Input Offset Current-Max (IIO) 0.00005μA
Height 1.07mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
REACH SVHC No SVHC

OPA2357AIDGST Overview


It is packaged in an 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. A Cut Tape (CT) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 10. Linear amplifier has a total of 10 pins. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 10 pins are present on the instrumentation amplifier. There is an input offset voltage of 8mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 4.9mA . Keeping the voltage gain at 110dB is the best course of action. As far as the device is concerned, buffer amplifier has 2 channels. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. A TR-shaped amplifier is used to pack the buffer amps.

OPA2357AIDGST Features


10 Pins
supply voltage of 3V
110dB voltage gain
Output Type: Rail-to-Rail

OPA2357AIDGST Applications


There are a lot of Texas Instruments OPA2357AIDGST Instrumentational OP Amps applications.

  • Weak signal detection
  • Exponential operation circuits
  • Mobile phone
  • Industrial applications including automation
  • Image computer boards
  • Signal amplification
  • PDA
  • Signal operation
  • Blood pressure sensors
  • Vehicle electronics

Write a review

Note: HTML is not translated!
    Bad           Good