OPA2364AIDG4

2 Channels 85mA per Channel 1pA 74 dB Instrumentational OP Amps 0.00001μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA2364 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2364AIDG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 706
Description: 2 Channels 85mA per Channel 1pA 74 dB Instrumentational OP Amps 0.00001μA 2.75V 1.8V~5.5V ±0.9V~2.75V OPA2364 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.6V
Base Part Number	OPA2364
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	2.75V
Number of Channels	2
Operating Supply Current	1.1mA
Nominal Supply Current	2.8mA
Slew Rate	5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	74 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
Output Current per Channel	85mA
Input Offset Voltage (Vos)	2.5mV
Bandwidth	7MHz
Unity Gain BW-Nom	7000 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.00001μA
Power Supply Rejection Ratio (PSRR)	81.94dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	5.5V
Voltage - Input Offset	1mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Max I/O Voltage	2.5mV
Input Offset Current-Max (IIO)	0.00001μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2364AIDG4 Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 3.6V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 2.5mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 1.1mA, this op amp ic can operate. 100dB should be the voltage gain. Buffer op amp is equipped with 2 channels on the device. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 2.75V.