Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.6V |
Base Part Number |
OPA2364 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
2.75V |
Number of Elements |
2 |
Operating Supply Current |
1.1mA |
Nominal Supply Current |
2.8mA |
Slew Rate |
5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
74 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±0.9V~2.75V |
Output Current per Channel |
85mA |
Input Offset Voltage (Vos) |
2.5mV |
Bandwidth |
7MHz |
Unity Gain BW-Nom |
7000 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
81.94dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
5.5V |
Voltage - Input Offset |
1mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Max I/O Voltage |
2.5mV |
Input Offset Current-Max (IIO) |
0.00001μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA2364AIDRG4 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 3.6V. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Op amp ic rates 2.5mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 1.1mA. There should be no change in the voltage gain at 100dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 2.75V. It is used TR to pack the op amps.
OPA2364AIDRG4 Features
8 Pins
supply voltage of 3.6V
100dB voltage gain
Output Type: Rail-to-Rail
OPA2364AIDRG4 Applications
There are a lot of Texas Instruments OPA2364AIDRG4 Instrumentational OP Amps applications.
- Automotive sensors
- Division circuits
- Switching amplifier
- Computer workstations
- Semiconductor detectors
- Oscilloscopes
- Blood pressure sensors
- Cinema or auditorium audio system
- Commercial audio systems
- Weighing systems