Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.6V |
Terminal Pitch |
0.65mm |
Base Part Number |
OPA2364 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
2.75V |
Number of Elements |
2 |
Operating Supply Current |
1.1mA |
Nominal Supply Current |
2.8mA |
Slew Rate |
5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
74 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±0.9V~2.75V |
Output Current per Channel |
85mA |
Input Offset Voltage (Vos) |
900μV |
Bandwidth |
7MHz |
Unity Gain BW-Nom |
7000 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
81.94dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
5.5V |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Max I/O Voltage |
900μV |
Input Offset Current-Max (IIO) |
0.00001μA |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA2364IDGKTG4 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 3.6V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 900μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. You can run this op amp ic on 1.1mA . Voltage gain should remain at 100dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. A TR-shaped amplifier is used to pack the buffer amps.
OPA2364IDGKTG4 Features
8 Pins
supply voltage of 3.6V
100dB voltage gain
Output Type: Rail-to-Rail
OPA2364IDGKTG4 Applications
There are a lot of Texas Instruments OPA2364IDGKTG4 Instrumentational OP Amps applications.
- Micro signal measurement
- Radiation thermometry transducers
- Medical instruments
- Fission chambers
- PDA
- Video data acquisition
- Broadcasting
- Instrumentation
- Addition operation circuits
- E-book readers