OPA2374AID
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | OPA2374 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 585μA |
| Nominal Supply Current | 1.5mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.5V ±1.15V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 6.5MHz |
| Unity Gain BW-Nom | 6500 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 92.04dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 6.5MHz |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
OPA2374AID Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. A total of 8 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. There is an input offset voltage of 5mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . An 585μA volt supply current is needed for this linear amplifier to operate. Maintain 110dB as the voltage gain. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. It is possible to count 2 elements on this buffer amplifier.
OPA2374AID Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
OPA2374AID Applications
There are a lot of Texas Instruments OPA2374AID Instrumentational OP Amps applications.
- Ultrasound transducers
- ECG equipment
- Scintillation detectors
- High gain DC amplifier
- PDA
- Video amplifiers
- Video data acquisition
- Digital cameras
- Automotive sensors
- earphone
