Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
25.996513mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
Resistance |
10 TΩ |
Subcategory |
Other Telecom ICs |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
OPA2380 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Operating Supply Current |
7.5mA |
Supply Current-Max |
0.016mA |
Slew Rate |
80V/μs |
Amplifier Type |
Transimpedance |
Common Mode Rejection Ratio |
95 dB |
Current - Input Bias |
3pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Output Current per Channel |
150mA |
Input Offset Voltage (Vos) |
25μV |
Gain Bandwidth Product |
90MHz |
Voltage Gain |
110dB |
Power Supply Rejection Ratio (PSRR) |
112.4dB |
Voltage - Input Offset |
4μV |
Telecom IC Type |
TELECOM CIRCUIT |
Max I/O Voltage |
25μV |
Input Voltage Noise Density |
67nV/sqrt Hz |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA2380AIDGKRG4 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. Buffer amps of this type are called Transimpedance-types. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Other Telecom ICs op amp ic can be identified by the fact that this is a type of Other Telecom ICs device. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 25μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 7.5mA , this buffer op amp will be able to operate. Op amp is a member of the 110dB's 110dB family. A total of 2 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. It is important to keep the resistance within the 10 TΩ range of the linear amplifier. It uses a telecom IC type TELECOM CIRCUIT.
OPA2380AIDGKRG4 Features
8 Pins
supply voltage of 5V
110dB voltage gain
Resistance of 10 TΩ
OPA2380AIDGKRG4 Applications
There are a lot of Texas Instruments OPA2380AIDGKRG4 Instrumentational OP Amps applications.
- High input resistance broadband
- Precision measurement
- Switching amplifier
- Blood pressure sensors
- Industrial applications including automation
- Displayers for aircraft and air transportation control systems
- MP3
- Thermocouples
- RF cable systems
- Differentiator circuits