OPA2380AIDGKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Telecom ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2380 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Operating Supply Current | 7.5mA |
| Supply Current-Max | 0.016mA |
| Slew Rate | 80V/μs |
| Amplifier Type | Transimpedance |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 25μV |
| Gain Bandwidth Product | 90MHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 112.4dB |
| Voltage - Input Offset | 4μV |
| Max Input Current | 9.5mA |
| Telecom IC Type | TELECOM CIRCUIT |
| Input Current | 9.5mA |
| Max I/O Voltage | 25μV |
| Input Voltage Noise Density | 67nV/sqrt Hz |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2380AIDGKT Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Transimpedance type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are two types of Other Telecom ICs op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 25μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 7.5mA , this buffer op amp will be able to operate. 130dB should be the voltage gain. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The op amp resistance should stay within the range of 10 TΩ. Op amps using telecom IC types TELECOM CIRCUIT are used.
OPA2380AIDGKT Features
8 Pins
supply voltage of 5V
130dB voltage gain
Resistance of 10 TΩ
OPA2380AIDGKT Applications
There are a lot of Texas Instruments OPA2380AIDGKT Instrumentational OP Amps applications.
- Information processing
- Comparator
- Scintillation detectors
- RF cable systems
- earphone
- Communication
- Switching amplifier
- Portable media players
- Proportional operation circuits
- Computer workstations
