OPA2381AIDGKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Telecom ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2381 |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 2mA |
| Output Current | 10mA |
| Slew Rate | 12V/μs |
| Amplifier Type | Transimpedance |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 18MHz |
| Voltage Gain | 135dB |
| Power Supply Rejection Ratio (PSRR) | 109.12dB |
| Voltage - Input Offset | 7μV |
| Telecom IC Type | TELECOM CIRCUIT |
| Input Current | 1mA |
| Max I/O Voltage | 25μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2381AIDGKT Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Other Telecom ICs device. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 25μV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 800μA. The voltage gain should stay at 135dB. Buffer op amp is equipped with 2 channels on the device. Buffer amplifier uses telecom IC type TELECOM CIRCUIT.
OPA2381AIDGKT Features
8 Pins
supply voltage of 5V
135dB voltage gain
OPA2381AIDGKT Applications
There are a lot of Texas Instruments OPA2381AIDGKT Instrumentational OP Amps applications.
- Hand-held batteries
- Tablets
- Semiconductor detectors
- Multimedia playback equipment
- Communication device
- High input resistance broadband
- Navigation
- Video computer boards
- Portable media players
- Broadcasting
