OPA244NA/3KG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.5V |
| Base Part Number | OPA244 |
| Pin Count | 5 |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Nominal Supply Current | 60μA |
| Current - Supply | 50μA |
| Slew Rate | 0.16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.1V~18V |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 430 kHz |
| Neg Supply Voltage-Nom (Vsup) | -7.5V |
| Unity Gain BW-Nom | 430 kHz |
| Voltage Gain | 106dB |
| Power Supply Rejection Ratio (PSRR) | 106.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Current - Output / Channel | 25mA |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 430 kHz |
| Max I/O Voltage | 1.5mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA244NA/3KG4 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be 5 terminations in the next few months. In total, there are 5 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 7.5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 5 pins. Op amp rates 1.5mV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . There should be no change in the voltage gain. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 18V. A TR-shaped amplifier is used to pack the buffer amps. It is recommended that this electronic component be used with an 50μA supply. As the name implies, MicroAmplifier? refers to the series of the buffer op amp.
OPA244NA/3KG4 Features
5 Pins
supply voltage of 7.5V
106dB voltage gain
OPA244NA/3KG4 Applications
There are a lot of Texas Instruments OPA244NA/3KG4 Instrumentational OP Amps applications.
- Home audio systems
- Test and measurement instruments
- Navigation
- Comparator
- High-frequency data acquisition systems
- Professional videography
- Displayers for aircraft and air transportation control systems
- Laptop
- Television broadcasting equipment
- E-book readers
