OPA2604AP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA2604 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 10.5mA |
| Nominal Supply Current | 12mA |
| Max Supply Current | 12mA |
| Slew Rate | 25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 9V~48V ±4.5V~24V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 20MHz |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Description
An operational amplifier with two FET inputs, the OPA2604AP is made for improved AC performance. High-quality audio and other applications that need for dynamic performance benefit greatly from low distortion, low noise, and wide bandwidth.
Low harmonic distortion is produced via new circuit techniques and specialized laser-trimming of dynamic circuit performance. The outcome is a functioning amplifier with superb sound quality. Even with a high source impedance, the OPA2604AP's low-noise FET input offers a wide dynamic range. To reduce the need for interstage coupling capacitors, offset voltage is laser-trimmed.
The OPA2604AP is offered in 8-pin plastic mini-DIP and 8-pin SOIC surface-mount packages, both of which are temperature-rated for use between -25°C and 85°C.
Features
Wide Gain-Bandwidth: 20 MHz
Unity-Gain Stable
Wide Supply Range: VS= ±4.5 to ±24 V
Drives 600-Ω Loads
Low Distortion: 0.0003% at 1 kHz
Low Noise: 10 nV/√Hz
High Slew Rate: 25 V/μs
Applications
Data Acquisition
Transducer Amplifiers
Active Filters
Spectral Analysis Equipment
PCM DAC I/V Converters
Professional Audio Equipment
