OPA2673IRGVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2673 |
| Pin Count | 16 |
| Number of Channels | 2 |
| Operating Supply Current | 32mA |
| Nominal Supply Current | 29mA |
| Slew Rate | 3000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 7V~13V ±3.5V~6.5V |
| Output Current per Channel | 700mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 600MHz |
| Gain Bandwidth Product | 260MHz |
| Neg Supply Voltage-Nom (Vsup) | -6V |
| Unity Gain BW-Nom | 600000 kHz |
| Voltage Gain | 2dB |
| Power Supply Rejection Ratio (PSRR) | 49dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 5MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 6V |
| Neg Supply Voltage-Max (Vsup) | -6.5V |
| Max I/O Voltage | 7mV |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2673IRGVT Overview
In the package, you will find a 16-VQFN Exposed Pad-case to contain the op amp ic. Current Feedback-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 16. A total of 16 pins are attached to buffer op amp. This linear amplifier should be powered by an 6V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 16 pins. The input offset voltage is 7mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 32mA and 10 . It is a member of the 2dB's 2dB family. The op amp ic has 2 channels on it. For packing the buffer amplifier, the TR-axis is adopted.
OPA2673IRGVT Features
16 Pins
supply voltage of 6V
2dB voltage gain
OPA2673IRGVT Applications
There are a lot of Texas Instruments OPA2673IRGVT Instrumentational OP Amps applications.
- Semiconductor detectors
- Multiplication circuits
- Proportional counter tubes
- High input resistance broadband
- Hand-held batteries
- Radar
- Video conversion and routing
- Test and measurement instruments
- Measurements of Wheatstone bridge
- Video amplifiers
