OPA2677U
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | SpeedPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 6V |
| Base Part Number | OPA2677 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 18mA |
| Nominal Supply Current | 18.6mA |
| Slew Rate | 2000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 49 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 500mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 220MHz |
| Gain Bandwidth Product | 2GHz |
| Neg Supply Voltage-Nom (Vsup) | -6V |
| Unity Gain BW-Nom | 220000 kHz |
| Average Bias Current-Max (IIB) | 35μA |
| Power Supply Rejection Ratio (PSRR) | 52dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 250MHz |
| Bias Current-Max (IIB) @25C | 30μA |
| Programmable Power | NO |
| Dual Supply Voltage | 6V |
| Max I/O Voltage | 5.5mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2677U Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are Current Feedback types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 6V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Operational amplifier can operate supply current at 18mA. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The SpeedPlus? stands for the buffer op amp's serial number.
OPA2677U Features
8 Pins
supply voltage of 6V
OPA2677U Applications
There are a lot of Texas Instruments OPA2677U Instrumentational OP Amps applications.
- Signal transformation
- High input resistance broadband
- Differentiator circuits
- Blood pressure sensors
- Large motor controllers
- Television broadcasting equipment
- Video amplifiers
- High-frequency data acquisition systems
- Portable media players
- Wireless base stations
