OPA2691I-14DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 756mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | OPA2691 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Operating Supply Current | 10.2mA |
| Nominal Supply Current | 10.6mA |
| Power Dissipation | 756mW |
| Slew Rate | 2100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 190mA |
| Input Offset Voltage (Vos) | 800μV |
| Bandwidth | 280MHz |
| Gain Bandwidth Product | 2GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 280000 kHz |
| Average Bias Current-Max (IIB) | 35μA |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Settling Time | 8 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 40μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.5V |
| Max I/O Voltage | 3mV |
| Voltage Gain-Min | 550 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2691I-14DR Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 14. In this case, there are 14 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 14-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 800μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 10.2mA . This linear amplifier has a total of 2 elements. To pack the operational amplifier ics, TR is adopted as the packing method. This operational amplifier can conduct a voltage gain of up to 550 at a minimum.
OPA2691I-14DR Features
14 Pins
supply voltage of 5V
OPA2691I-14DR Applications
There are a lot of Texas Instruments OPA2691I-14DR Instrumentational OP Amps applications.
- Video amplifiers
- RF cable systems
- Test equipment
- Oscilloscopes
- Gaming industry
- Signal operation
- single/dual op amp sum and difference circuits
- Laptop
- Weak signal detection
- Micro signal measurement
