OPA2703UA

2 Channels 10mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00001μA 6V 4V~12V ±2V~6V OPA2703 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2703UA
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 348
Description: 2 Channels 10mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00001μA 6V 4V~12V ±2V~6V OPA2703 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	OPA2703
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	6V
Number of Channels	2
Operating Supply Current	160μA
Nominal Supply Current	400μA
Output Current	10mA
Slew Rate	0.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4V~12V ±2V~6V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	750μV
Bandwidth	1MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00001μA
Power Supply Rejection Ratio (PSRR)	93.98dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	160μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	1MHz
Max I/O Voltage	750μV
Input Offset Current-Max (IIO)	0.00001μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2703UA Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. The op amp is delivered to you in a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. The input offset voltage is 750μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. An 160μA volt supply current is needed for this linear amplifier to operate. Maintain 120dB as the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 6V.